Facile synthesis of graft copolymers containing rigid poly(dialkyl fumarate) branches by macromonomer method

Graft copolymers show microphase separated structure as seen in block copolymers and have lower intrinsic viscosity than block copolymers because of a branching structure. Therefore, considering molding processability, especially for polymers containing rigid segments, graft copolymers are useful architectures. In this work, graft copolymers containing rigid poly(diisopropyl fumarate) (PDiPF) branches were synthesized by full free‐radical polymerization process. First, synthesis of PDiPF macromonomers by addition‐fragmentation chain transfer (AFCT) was investigated. 2,2‐Dimethyl‐4‐methylene‐pentanedioic acid dimethyl ester was found to be an efficient AFCT agent for diisopropyl fumarate (DiPF) polymerization because of the suppression of undesired primary radical termination, which significantly took place when common AFCT agent, methyl 2‐(bromomethyl)acrylate, was used. Copolymerization of PDiPF macromonomer with ethyl acrylate accomplished the generation of the graft copolymer having flexible poly(ethyl acrylate) backbone and rigid PDiPF branches. The graft copolymer showed a microphase separated structure, high transparency, and characteristic thermal properties to PDiPF and poly(ethyl acrylate). © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2474–2480     

Amphiphilic Graft Copolymers of Hydroxypropyl Cellulose Backbone with Nonpolar Polyisobutylene Branches

The novel amphiphilic graft copolymers with hydrophilic hard polar hydroxypropyl cellulose(HPC) backbone and hydrophobic soft nonpolar polyisobutylene(PIB) branches have been successfully synthesized through nucleophilic substitution reaction of living PIB chains carrying oxonium ions with the-OH groups along HPC backbone. The PIB branch length in the graft copolymers could be designed by living cationic polymerization and the grafting density could be adjusted by PIB~+/-OH molar ratio. The living PIB chains carrying oxonium ion were prepared by transformation of allyl bromide end groups in the presence of AgClO_4 and silver nanoparticles(3.2±0.3 nm, 0.7 wt%-1.8 wt%)generated in situ from AgBr. The phase-separation morphology was formed in the graft copolymers due to their incompatibility between backbone and branches. The hydrophilicity on the surface of graft copolymer films could be turned to hydrophobicity by increasing grafting density or/and length of PIB branches. The soft PIB segments in graft copolymers provided an unique surface via self-assembly for anti-protein adsorption against bovine serum albumin. A small amount of Ag nanoparticles in the copolymers contributed to good antibacterial activities against Staphylococcus aureus or Escherichia coli.     

Self-assembly mechanism of PEG-b-PCL and PEG-b-PBO-b-PCL amphiphilic copolymer micelles in aqueous solution from coarse grain modeling

We followed the self-assembly of high-molecular weight MePEG- b -PCL (poly(methyl ethylene glycol)-block-poly(ε-caprolactone)) diblock and MePEG- b -PBO- b -PCL (poly(methyl ethylene glycol)-block-poly(1,2-butylene oxide)-block-poly(ε-caprolactone)) into micelles using molecular dynamics simulation with a coarse grain (CG) force field based on quantum mechanics (CGq FF). The triblock polymer included a short poly(1,2-butylene oxide) (PBO) at the hydrophilic-hydrophobic interface of these systems. Keeping the hydrophilic length fixed (MePEG₄₅), we considered 250 chains in which the hydrophobic length changed from PCL₄₄ or PBO₆- b -PCL₄₃ to PCL₆₂ or PBO₉- b -PCL₆₁. The polymers were solvated in explicit water for 2 μs of simulations at 310.15 K. We found that the longer diblock system undergoes a morphological transition from an intermediate rod-like micelle to a prolate-sphere, while the micelle formed from the longer triblock system is a stable rod-like micelle. The two shorter diblock and triblock systems show similar self-assembly processes, both resulting in slightly prolate-spheres. The dynamics of the self-assembly is quantified in terms of chain radius of gyration, shape anisotropy, and hydration of the micelle cores. The final micelle structures are analyzed in terms of the local density components. We conclude that the CG model accurately describes the molecular mechanisms of self-assembly and the equilibrium micellar structures of hydrophilic and hydrophobic chains, including the quantity of solvent trapped inside the micellar core.     

Influence of the PVOH molar mass on the morphology and functional properties of EVOH/PVOH films prepared by melt blending

The influences of the molar mass (low, medium, and high) and content of poly(vinyl alcohol) (PVOH) dispersed by melt-blending in an ethylene vinyl alcohol (EVOH) copolymer on the morphology, microstructure, thermal, mechanical, and oxygen barrier properties were investigated. Multilayer films with external low-density polyethylene layers and inner EVOH/PVOH blend layer and respective monolayer films were elaborated and characterized. EVOH/PVOH blends exhibited a good compatibility because of the initial presence of PVOH segments in EVOH. The detailed quantitative analysis of the morphology performed for all blends showed that the finest dispersion was obtained with the PVOH with the lowest molar mass. The properties of the films as a function of the PVOH content and its molar mass were determined herein. Significant improvement of barrier properties was obtained at moderated water activities (up to a_w = 0.6) by using the PVOH with the lowest molar mass. Compared to the neat EVOH material, the oxygen permeability coefficients decreased by a factor 2 by adding 15 vol% PVOH while the thermal and mechanical properties remained similar.     

Behavior of poly(ε-caprolactone)-based diblock copolymers in a bulk state and in solution

Abstract

A series of amphiphilic MOPEO-b-PCL copolymers (DBCs), based on biocompatible methoxypoly(ethylene oxide) with M_n=4.5?kDa and poly(ε-caprolactone) of a variable chain length, was synthesized by an anionic ring-opening block copolymerization. The structural investigations, performed by DSC and WAXS methods, revealed the microphase separation in DBC bulk structure and the existence of separate amorphous regions and microcrystalline domains of MOPEO and PCL blocks. Spectrophotometry and SLS were used to study the self-assembling of DBC macromolecules in selective dioxane/aqueous solution and to determine the main micellization parameters (CMC and -ΔG°). The DBC micelles morphology and their specific aggregation in mixed solvent were shown.     

Synthesis of poly(n‐butyl acrylate) homopolymer and poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) triblock copolymer via AGET emulsion ATRP using a cationic surfactant

Cationic emulsions of triblock copolymer particles comprising a poly(n‐butyl acrylate) (PⁿBA) central block and polystyrene (PS) outer blocks were synthesized by activator generated by electron transfer (AGET) atom transfer radical polymerization (ATRP). Difunctional ATRP initiator, ethylene bis(2‐bromoisobutyrate) (EBBiB), was used as initiator to synthesize the ABA type poly(styrene‐b‐n‐butyl acrylate‐b‐styrene) (PS‐PⁿBA‐PS) triblock copolymer. The effects of ligand and cationic surfactant on polymerizations were also discussed. Gel permeation chromatography (GPC) was used to characterize the molecular weight (M_n) and molecular weight distribution (MWD) of the resultant triblock copolymers. Particle size and particle size distribution of resulted latexes were characterized by dynamic light scattering (DLS). The resultant latexes showed good colloidal stability with average particle size around 100–300 nm in diameter. Glass transition temperature (T_g) of copolymers was studied by differential scanning calorimetry (DSC). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 611–620     

溶剂去除速度对于溶剂退火薄膜相形貌的影响

以聚苯乙烯-聚4-乙烯基吡啶(PS-b-P4VP)嵌段共聚物作为研究对象,采用DMF作为退火溶剂,以原子力显微镜(AFM)和透射电子显微镜(TEM)为表征手段,研究了溶剂退火后期溶胀薄膜中溶剂的去除速度对于薄膜相形貌的影响,发现通过改变溶剂去除速度可以有效的调控薄膜中的形貌.当薄膜厚度为35 nm时,DMF的快速挥发会导致薄膜中形成以PS为分散相的反转柱状相结构,当降低溶剂的挥发速度时,薄膜中形成了以PS为分散相的环状形貌,当进一步减缓挥发速度时,薄膜中将形成台阶状的片层结构;然而当薄膜厚度为55 nm时,溶剂退火后期薄膜中形成的是以P4VP为分散相的正常柱状相结构,在相同溶剂去除速度条件下薄膜相形貌变化较小.     

Coatings with thermally switchable surface energy produced from poly(ethylene oxide)-poly(dimethylsiloxane) block copolymer films

This work explores coatings with thermally switchable wetting behavior, based on block copolymers that possess both hydrophilic and hydrophobic segments. The amphiphilic block copolymers were synthesized by coupling allyl-ended poly(ethylene oxide) (PEO) and hydride-ended poly(dimethylsiloxane) (PDMS) oligomers via a Pt catalyst. One near-symmetric diblock possessed an order-disorder transition temperature (T_ODT) of 64 °C. When cooled through T_ODT in ambient air, the PDMS domains wet the film's surface, producing a hydrophobic coating with a water contact angle (CA) = 90°. However, when cooled in humidified air, hydrophilic PEO domains form at the surface, yielding CA = 30–40°. The coatings can be reversibly switched between the two states by reheating above T_ODT, in the appropriate environment, and then cooling, rapidly generating the desired room-temperature surface wettability. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 135–140     

Fluorinated star‐shaped block copolymers: Synthesis and optical properties

Tetrakis(4‐(1‐bromoethyl)phenyl)silane is synthesized and utilized to initiate the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) to generate bromo‐terminated four‐armed PMMA macroinitiators, which further initiate the ATRP of methylacryloyloxyl‐2‐hydroxypropyl perfluorooctanoate (FGOA) to create fluorinated star‐shaped block copolymers PMMA‐b‐poly(FGOA)s with fluorine content ranging from 0 to 31.7 wt %. The polymerizations are well controlled with the polydispersity indices <1.30. The polymers readily dissolve in common organic solvents and show good film‐formation. Compared with the nonfluorinated sample, the fluorinated films exhibit significantly increased water contact angles owing to the enrichment of fluorine on the surface. The enhanced hydrophobicity is advantageous for the optical stability when the devices work under a moist environment. Moreover, the films possess high thermo‐optic coefficients, tunable refractive indices, and extremely low birefringence coefficients because of the presence of bulky and rigid tetraphenylsilane core and star‐shaped topological structure, showing potential application in optical waveguide devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1969–1977